PETROSEAL

Application

Bathroom & Wet-Area Waterproofing

Bathroom and wet-area waterproofing creates a continuous barrier under tiles at floors, shower niches, and upstands. Petroseal’s PetroSelfGrip (Elastogrip) self-adhesive SBS membrane is designed for flame-free application on primed substrates—useful in occupied buildings where torch work is restricted. Thickness grade (1.5 mm or 2 mm) should match the exposure and designer’s detail.

Recommended systems

Match site condition to a Petroseal system page.

ConditionRecommended system
Internal wet areasSelf-adhesive membrane system
Torch restrictedPetroSelfGrip PL-150 / PL-200

Technical requirements

  • Smooth, dry substrate; PETRO-PRIMER GRIP where specified
  • Staggered overlaps; firm rolling to exclude air pockets
  • Upstands to design height before tiling

Limitations

  • Not a substitute for correct falls to floor wastes

Application sequence

  1. Prime
  2. Cut and align membrane
  3. Peel and bond
  4. Detail corners
  5. Tile

Common failure modes

  • Skipped primer
  • Open corners at niches

Related systems

  • Self-Adhesive Membrane System

    Self-adhesive membrane systems use SBS-modified bitumen sheets with release film for cold application on primed substrat…

Related products

  • PetroSelfGrip

    Cold-applied peel-and-stick bitumen membrane in 1.5mm and 2mm.

  • PetroDPC

    Damp-proof course bitumen rolls for walls, plinths, and foundations.

Technical downloads

Technical guides

FAQ

Do I need a torch for bathroom waterproofing?
Not with PetroSelfGrip / Elastogrip self-adhesive membranes. Torch-applied sheets are a different system family.