Technical document
Elastogrip PL-150 / PetroSelfGrip 1.5 mm TDS
SBS self-adhesive modified bituminous membrane — cold-applied peel-and-stick grade for wet areas and detailing.
Elastogrip / PetroSelfGrip is a self-adhesive SBS-modified bituminous membrane for flame-free waterproofing. The release film is peeled during placement; the membrane is pressed to a primed substrate without air pockets.
Suitable for kitchens, bathrooms, terraces, balconies, DPC details, footings, retaining walls, tunnels, and pipe wrapping where torch application is difficult or restricted.
Key specifications
Values shown are taken from the published brochure/TDS. Project acceptance follows the approved batch certificate and consultant specification.
- Product
- Elastogrip PL-150 SBS self-adhesive
- Nominal grade
- 1.5 mm
- Carrier
- Rot-proof non-woven polyester ~140–160 g/m²
- Compound
- SBS-modified bitumen
- Primer
- PETRO-PRIMER GRIP (required)
- Side overlap
- 3 inches
- End lap
- 4 inches
Applications
- — Bathrooms and wet areas
- — Terraces and balconies
- — Damp-proof course detailing
- — Confined spaces without torch work
Related products
- PetroSelfGrip
Cold-applied peel-and-stick bitumen membrane in 1.5mm and 2mm.